Polar Pro 7.5 kW wall EV charger








A 7.5 kW smart wall EV charger for your home. Start it from the app or an RFID card, with 10+ safety protections built in.
Polar Pro is a 7.5 kW single-phase wall-mounted EV charger from Zevpoint, for electric cars with a Type 2 socket. Price: Rs. 29,999.00 to Rs. 32,499.00, including GST. Ships within 24 hours across India with Cash on Delivery and no-cost EMI.
- 4.3-inch display
- RFID · App
- Emergency stop
- 10+ built-in protections
A 7.5 kW wall charger with a display on the unit, control from your phone and the safety to leave it running overnight.
- 4.3-inch display: See current, energy and time at a glance.
- RFID card start: Tap the card and charging begins.
- Emergency stop button: One press cuts the power instantly.
- TPU cable, 5 m or 7 m: Pick the length that reaches your parking spot.
- Plan: Schedule charging for the hours that suit you.
- Track: See every session and the energy it used.
- Adapt: Set the speed anywhere from 1.4 to 7.5 kW.
- OTA updates: New firmware arrives over the air.
- 10+ safety protections: Overload, short-circuit, leakage, earthing, over-temperature and more.
- Auto cut-off: Stops on its own when charging is complete.
- IP66 rated: Dust and water resistant, indoors or out.
- ARAI · CE certified: Tested to Indian and international standards.
Which one is right for you?
- Polar Pro (7.5 kW): Any home, single- or three-phase, with a car that charges at 7 kW.
- Polar X1 (11 kW): A three-phase home and a car that charges at 11 kW.
- Polar Max (22 kW): A three-phase supply and a car that charges at 22 kW.
Cars that charge at full speed on Polar Pro
BYD Atto 3, BYD e6, BYD eMAX 7, BYD Seal, Eicher Pro 2055 EV, Hyundai Inster, Hyundai Kona Electric, Jupiter Electric JEM TEZ, Mahindra 3XO, Mahindra XUV400 EV, Mahindra Zeo, Maruti Suzuki e Vitara, Mercedes-Benz EQC, MG Comet EV FC, MG Hector Tomahawk EV, MG Windsor EV, MG ZS EV, Montra Electric Eviator, Switch Mobility IeV3, Switch Mobility IeV4, Tata Curvv EV, Tata Harrier EV, Tata Intra EV, Tata Nexon EV LR, Tata Nexon EV MR, Tata Punch EV, Tata Safari EV, Tata Sierra EV, Tata Tiago EV (New Generation), Tata Xpres-T EV, Toyota Urban Cruiser Ebella, VinFast VF MPV 7, VinFast VF6, VinFast VF7.
Polar Pro specifications
- Output: Up to 7.5 kW
- Supply: Single phase, 230 V AC
- Max output current: 32 A
- Adjustable current: 8 A to 32 A
- Plug: Wired to a dedicated circuit (wall-mounted)
- Car connector: Type 2 (IEC 62196-2)
- Cable length: 5 m (7 m on the XL version)
- Control: Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)
- Display: 4.3-inch LED display with live session data
- Updates: Over-the-air (OTA) firmware updates
- Protection rating: IP66, dust and water resistant
- Safety: Emergency stop switch, short-circuit, over-temperature, leakage, over-current, over-voltage and under-voltage protection, charge-status detection, warning indicators
- Efficiency: Above 96%
- Housing: High-grade ABS, Arctic White
- Operating temperature: -25°C to +50°C
- Unit size: 322 x 188 x 119 mm
- Weight: 7 kg
- Packed size: 440 x 400 x 200 mm
- Certifications: CE, ARAI
- Compliance: ISO 15118, IEC 61851
- In the box: Polar Pro charger, mounting bracket, RFID card, mounting screws, installation manual
- Warranty: 5 years on cable and enclosure, 2 years on all other components
What your site needs for Polar Pro
- Power point: Dedicated single-phase circuit — Wired straight to the charger from your distribution board.
- Supply cable: 6 sq mm, 3-core copper — XLPE / HR FRLS, up to 29 m. Use 10 sq mm up to 49 m; longer runs need a site survey.
- Circuit breaker: 40 A double-pole MCB — A breaker of its own, so the charger never shares a circuit.
- Surge protection: Type 2 SPD, 1P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
- Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
- Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.
Is Polar Pro the right home EV charger for a single-phase house?
Yes. Polar Pro is a 7.5 kW wall-mounted home EV charger made for the single-phase supply most Indian homes have, and it gives its full 7.5 kW on it. It also works in a three-phase home, on one of the phases. Cars that charge at about 7 kW, such as the Tata Nexon EV, Tata Punch EV, MG Windsor EV and Mahindra XUV400 EV, charge at their full home speed on Polar Pro.
Is a 7.5 kW EV charger different from a 7 kW, 7.2 kW or 7.4 kW one?
They are all 32 A single-phase chargers; the label changes with the voltage the maker assumes (32 A at 220 V is about 7 kW, at 235 V about 7.5 kW). Polar Pro is rated 7.5 kW, a little above what any 7.2 kW or 7.4 kW car takes, so your car always gets its full home speed and the charger is never pushed to its limit. It also protects itself against high and low voltage.
How long does Polar Pro take to charge an electric car?
A car that charges at about 7 kW fills a 40 kWh battery from empty in about 6 hours on Polar Pro, so an overnight charge is enough. The charging-speed tool on this page shows the time for your car.
What cable and breaker does Polar Pro need?
Polar Pro needs at least 6 sq mm copper cable and a 40 A MCB of its own, plus surge protection and earthing. Our electrician checks your site before installing.
Can I set Polar Pro to suit my sanctioned load?
Yes. In the Zevpoint Home app you can set the charging current of Polar Pro anywhere from 8 A to 32 A, so this wall charger stays within the load on your connection. It holds the current you set rather than adjusting by itself.
Does Polar Pro work with every electric car in India?
Polar Pro has a Type 2 connector, which almost every electric car sold in India uses, so this wall-mounted home EV charger works with all of them. How fast it charges depends on the car. The charging-speed tool on this page shows the time for your car.
Is my home’s sanctioned load enough for Polar Pro?
Check two things on your electricity bill: the sanctioned load, and whether the supply is single phase or three phase. If the load is short for Polar Pro, your electricity company can raise it; the application is made in your name and we guide you through it.
Is Polar Pro waterproof? Can this wall-mounted home EV charger be installed outdoors?
Yes. Rain, splashing water and dust do not harm Polar Pro, so it can be mounted in an open parking spot or driveway. It is not built to stand in water, so do not mount it where water collects or floods.
Does Polar Pro restart charging after a power cut?
Yes. When Polar Pro is set to Quick charge or Plug & charge mode, charging resumes by itself once the power is back.
Who installs Polar Pro, and what if I live in a housing society?
We deliver, install and service Polar Pro in every city across India. Installation covers mounting the charger, fitting its breaker and surge protection device, testing and commissioning, with cable-laying labour for up to 10 metres.
If the charger or its cable passes through common areas, you will need permission (NOC) from your society before the visit.
What if Polar Pro stops working?
Raise a service request or write to support@zevpoint.com. We first try to fix Polar Pro remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.
Which Wi-Fi does the Polar Pro app need?
The Zevpoint Home app connects Polar Pro over 2.4 GHz Wi-Fi. If your router is 5 GHz only, a 2.4 GHz mobile hotspot works as well.
How soon is Polar Pro shipped, and is Cash on Delivery available?
Orders are processed and shipped within 24 hours, and tracking details are emailed to you.
Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.
GST invoice: email your GST details to support@zevpoint.com after ordering.
What does the Polar Pro warranty cover?
Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.
The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms
Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.
Can I return Polar Pro?
Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return
Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy
Polar Pro is a wall-mounted 7.5 kW charger for a permanent spot at home. It draws a full 32A on single-phase power, so it delivers the complete 7.5 kW without a three-phase connection.
Start a session three ways: plug in and charge, tap the RFID card, or use the Zevpoint Home App over Wi-Fi or Bluetooth. An emergency stop switch sits on the unit, and the XL version has a 7 m cable for a charger mounted further from the parking spot.
Specifications
- Output: Up to 7.5 kW
- Supply: Single phase, 220-240V
- Current: Adjustable from 8A to 32A
- Plug: Wired to a dedicated circuit (wall-mounted)
- Car connector: Type 2 (IEC 62196-2)
- Cable length: 5 m (7 m on the XL version)
- Control: Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)
- Updates: Over-the-air (OTA) firmware updates
- Protection rating: IP66, dust and water resistant
- Safety: 10+ built-in protections: emergency stop switch, overload, short-circuit, leakage, earthing, over-temperature, over-current, over-voltage and under-voltage protection, charge-status detection and warning indicators
- Finish: Arctic White
- Operating temperature: -35°C to +60°C
- Unit size: 322 x 188 x 119 mm
- Weight: 6.5 kg
- Packed size: 440 x 400 x 200 mm
- In the box: Polar Pro charger, mounting bracket, RFID card, mounting screws, installation manual
- Warranty: 5 years on cable and enclosure, 2 years on all other components
Installation
- Power point: A dedicated single-phase circuit, wired to the charger
- Cable: 6 sq mm 3-core copper cable (XLPE / HR FRLS) for a run of up to 29 m from the distribution board; 10 sq mm up to 49 m. Longer runs need a site survey.
- Circuit breaker: 40A double-pole MCB
- Surge protection: Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
- Earthing: Proper earthing is required
- Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.