Polar X1 11 kW wall EV charger








An 11 kW smart wall EV charger for three-phase homes. Start it from the app or an RFID card, with 10+ safety protections built in.
Polar X1 is a 11 kW three-phase wall-mounted EV charger from Zevpoint, for electric cars with a Type 2 socket. Price: Rs. 34,999.00 to Rs. 37,499.00, including GST. Ships within 24 hours across India with Cash on Delivery and no-cost EMI.
- 4.3-inch display
- RFID · App
- Emergency stop
- 10+ built-in protections
A 11 kW three-phase wall charger with a display on the unit, control from your phone and the safety to leave it running overnight.
- 4.3-inch display: See current, energy and time at a glance.
- RFID card start: Tap the card and charging begins.
- Emergency stop button: One press cuts the power instantly.
- TPU cable, 5 m or 7 m: Pick the length that reaches your parking spot.
- Plan: Schedule charging for the hours that suit you.
- Track: See every session and the energy it used.
- Adapt: Adjust charging speed from 8–16 A from the app.
- OTA updates: New firmware arrives over the air.
- 10+ safety protections: Overload, short-circuit, leakage, earthing, over-temperature and more.
- Auto cut-off: Stops on its own when charging is complete.
- IP66 rated: Dust and water resistant, indoors or out.
- ARAI · CE certified: Tested to Indian and international standards.
Which one is right for you?
- Polar Pro (7.5 kW): Any home, single- or three-phase, with a car that charges at 7 kW.
- Polar X1 (11 kW): A three-phase home and a car that charges at 11 kW.
- Polar Max (22 kW): A three-phase supply and a car that charges at 22 kW.
Cars that charge at full speed on Polar X1
Audi e-tron, Audi e-tron GT, Audi e-tron Sportback, Audi Q8 e-tron, Audi Q8 Sportback e-tron, Audi RS e-tron GT, BMW i4, BMW i5, BMW i7, BMW iX, BMW iX1, BMW iX1 LWB, BYD Sealion 7, Hyundai Creta Electric, Hyundai Ioniq 5, Jaguar I-PACE, Kia Carens Clavis EV (42 kWh), Kia Carens Clavis EV (51.4 kWh), Kia EV6, Kia EV9, Kia Syros EV, Mahindra BE 6, Mahindra XEV 9e, Mahindra XEV 9S, Mercedes-Benz CLA Electric, Mercedes-Benz EQA, Mercedes-Benz EQB, Mercedes-Benz EQE SUV, Mercedes-Benz EQS, Mercedes-Benz EQS SUV, Mercedes-Benz G 580 with EQ Technology, Mercedes-Benz Maybach EQS 680 SUV, MG Cyberster, MG M9, MINI Cooper SE, MINI Countryman Electric, Porsche Cayenne Electric, Porsche Macan Electric, Porsche Taycan, Rolls-Royce Spectre, Skoda Elroq, Tata Avinya, Tesla Model Y, Toyota Urban Cruiser EV, Volvo EC40, Volvo EX30, Volvo EX40, Volvo XC40 Recharge.
Polar X1 specifications
- Output: Up to 11 kW
- Supply: Three phase, 400 V AC
- Max output current: 16 A per phase
- Adjustable current: 8 A to 16 A
- Plug: Wired to a dedicated circuit (wall-mounted)
- Car connector: Type 2 (IEC 62196-2)
- Cable length: 5 m (7 m on the XL version)
- Control: Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)
- Display: 4.3-inch LED display with live session data
- Updates: Over-the-air (OTA) firmware updates
- Protection rating: IP66, dust and water resistant
- Safety: Emergency stop switch, short-circuit, over-temperature, leakage, over-current, over-voltage and under-voltage protection, charge-status detection, warning indicators
- Efficiency: Above 96%
- Housing: High-grade ABS, Arctic White
- Operating temperature: -25°C to +50°C
- Unit size: 322 x 188 x 119 mm
- Weight: 7 kg
- Packed size: 440 x 400 x 200 mm
- Certifications: CE, ARAI
- Compliance: ISO 15118, IEC 61851
- In the box: Polar X1 charger, mounting bracket, RFID card, mounting screws, installation manual
- Warranty: 5 years on cable and enclosure, 2 years on all other components
What your site needs for Polar X1
- Power point: Dedicated three-phase circuit — Wired straight to the charger from your distribution board.
- Supply cable: 4 sq mm, 5-core copper — XLPE / HR FRLS, up to 78 m. Use 6 sq mm up to 117 m; longer runs need a site survey.
- Circuit breaker: 20 A four-pole MCB — A breaker of its own, so the charger never shares a circuit.
- Surge protection: Type 2 SPD, 3P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
- Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
- Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.
Does Polar X1, the 11 kW home EV charger, need a three-phase supply?
Yes. Polar X1 gives its full 11 kW only on a three-phase supply, with a car that accepts 11 kW, such as the Hyundai Creta Electric, Mahindra BE 6, Mahindra XEV 9e and Kia Carens Clavis EV. On a single-phase supply it charges at about 3.6 kW.
Is Polar X1 faster than a 7.5 kW EV charger for my car?
Only if your car accepts 11 kW. Polar X1 gives 16 A on each phase, so a car that charges on a single phase, such as one with a 7.2 kW on-board charger like the Tata Nexon EV or MG Windsor EV, gets about 3.6 kW from it. For those cars the 7.5 kW Polar Pro is twice as fast. The charging-speed tool on this page shows the time for your car.
How long does Polar X1 take to charge an electric car?
A car that charges at 11 kW fills a 50 kWh battery from empty in about 5 hours on Polar X1. The charging-speed tool on this page shows the time for your car.
What cable and breaker does Polar X1 need?
Polar X1 needs a three-phase circuit with at least 4 sq mm copper cable and a 20 A four-pole MCB of its own, plus surge protection and earthing. Our electrician checks your site before installing.
Can I set Polar X1 to suit my sanctioned load?
Yes. In the Zevpoint Home app you can set the charging current of Polar X1 anywhere from 8 A to 16 A per phase, so this wall charger stays within the load on your connection. It holds the current you set rather than adjusting by itself.
Does Polar X1 work with every electric car in India?
Polar X1 has a Type 2 connector, which almost every electric car sold in India uses, so this wall-mounted home EV charger works with all of them. How fast it charges depends on the car. The charging-speed tool on this page shows the time for your car.
Is my home’s sanctioned load enough for Polar X1?
Check two things on your electricity bill: the sanctioned load, and whether the supply is single phase or three phase. If the load is short for Polar X1, your electricity company can raise it; the application is made in your name and we guide you through it.
Is Polar X1 waterproof? Can this wall-mounted home EV charger be installed outdoors?
Yes. Rain, splashing water and dust do not harm Polar X1, so it can be mounted in an open parking spot or driveway. It is not built to stand in water, so do not mount it where water collects or floods.
Does Polar X1 restart charging after a power cut?
Yes. When Polar X1 is set to Quick charge or Plug & charge mode, charging resumes by itself once the power is back.
Who installs Polar X1, and what if I live in a housing society?
We deliver, install and service Polar X1 in every city across India. Installation covers mounting the charger, fitting its breaker and surge protection device, testing and commissioning, with cable-laying labour for up to 10 metres.
If the charger or its cable passes through common areas, you will need permission (NOC) from your society before the visit.
What if Polar X1 stops working?
Raise a service request or write to support@zevpoint.com. We first try to fix Polar X1 remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.
Which Wi-Fi does the Polar X1 app need?
The Zevpoint Home app connects Polar X1 over 2.4 GHz Wi-Fi. If your router is 5 GHz only, a 2.4 GHz mobile hotspot works as well.
How soon is Polar X1 shipped, and is Cash on Delivery available?
Orders are processed and shipped within 24 hours, and tracking details are emailed to you.
Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.
GST invoice: email your GST details to support@zevpoint.com after ordering.
What does the Polar X1 warranty cover?
Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.
The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms
Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.
Can I return Polar X1?
Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return
Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy
Polar X1 is a wall-mounted 11 kW charger for homes and workplaces with a three-phase supply. It draws 16A per phase and delivers up to 11 kW to cars that can take it.
It needs a three-phase supply and a car that charges on three phase for 11 kW. On a single-phase supply, or with a car that charges on single phase (most 7.2 kW cars), it gives only about 3.6 kW; for those, Polar Pro is faster. Start a session by plug, RFID card or the Zevpoint Home App. The XL version has a 7 m cable.
Specifications
- Output: Up to 11 kW
- Supply: Three phase, 380-415V
- Single-phase supply or car: About 3.6 kW. It draws 16A per phase, so on a single-phase supply, or with a car that charges on single phase (most 7.2 kW cars), a 7.5 kW charger is faster.
- Current: Adjustable from 8A to 16A
- Plug: Wired to a dedicated circuit (wall-mounted)
- Car connector: Type 2 (IEC 62196-2)
- Cable length: 5 m (7 m on the XL version)
- Control: Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)
- Updates: Over-the-air (OTA) firmware updates
- Protection rating: IP66, dust and water resistant
- Safety: 10+ built-in protections: emergency stop switch, overload, short-circuit, leakage, earthing, over-temperature, over-current, over-voltage and under-voltage protection, charge-status detection and warning indicators
- Operating temperature: -35°C to +60°C
- Unit size: 322 x 188 x 119 mm
- Weight: 6.5 kg
- Packed size: 440 x 400 x 200 mm
- In the box: Polar X1 charger, mounting bracket, RFID card, mounting screws, installation manual
- Warranty: 5 years on cable and enclosure, 2 years on all other components
Installation
- Power point: A dedicated three-phase circuit, wired to the charger
- Cable: 4 sq mm 5-core copper cable (XLPE / HR FRLS) for a run of up to 78 m from the distribution board; 6 sq mm up to 117 m. Longer runs need a site survey.
- Circuit breaker: 20A four-pole MCB
- Surge protection: Type 2 SPD, three-phase (3P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
- Earthing: Proper earthing is required
- Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.