AIO Pro 7.5 kW all-in-one EV charger








A 7.5 kW smart all-in-one EV charger: full speed at home, and 3.6 kW on the road by swapping the plug. Touch and app control, IP65 rated.
AIO Pro is a 7.5 kW all-in-one EV charger from Zevpoint, with swappable plugs that fit the socket in front of you, a Type 2 car connector and control from the Zevpoint Home app. Price Rs. 22,999.00, incl. GST. Ships within 24 hours.
- Swappable plugs
- Touch & app control
- IP65
- 10+ safety protections
One charger that fits the socket in front of you: a full 7.5 kW from a 32 A point, or a regular home socket with the 16 A plug.
- Swappable plugs: 16 A and 32 A plugs on one unit.
- Large display: Live charging data on a TFT screen.
- Touch buttons: Control it right on the unit.
- 5 m cable: Reaches most parking spots.
- Plan: Schedule charging for the hours that suit you.
- Track: See every session and the energy it used.
- Adapt: Set the current up to 16 A or 32 A, by plug.
- OTA updates: New firmware arrives over the air.
- Built-in protections: Overload, short-circuit, leakage, earthing and over-temperature.
- Auto cut-off: Stops on its own when charging is complete.
- IP65 rated: Dust and water resistant, indoors or out.
- CE certified: Type-tested and certified.
Swappable plugs
- 16 A home socket — 3-pin plug — 3.6 kW
- 32 A CEE socket — Included in the box — 7.5 kW
Which one is right for you?
- AIO Pro (7.5 kW): One charger for your EV: charge faster at 7.5 kW at home, and at 3.6 kW while travelling by swapping the plug. For cars that charge at up to 7.5 kW.
- AIO Max (22 kW): Homes with more than one EV: one charges at 7 kW on single phase, another at 11 kW or more on three phase. Also suits charging in two places.
Cars that charge at full speed on AIO Pro
BYD Atto 3, BYD e6, BYD eMAX 7, BYD Seal, Eicher Pro 2055 EV, Hyundai Inster, Hyundai Kona Electric, Jupiter Electric JEM TEZ, Mahindra 3XO, Mahindra XUV400 EV, Mahindra Zeo, Maruti Suzuki e Vitara, Mercedes-Benz EQC, MG Comet EV FC, MG Hector Tomahawk EV, MG Windsor EV, MG ZS EV, Montra Electric Eviator, Switch Mobility IeV3, Switch Mobility IeV4, Tata Curvv EV, Tata Harrier EV, Tata Intra EV, Tata Nexon EV LR, Tata Nexon EV MR, Tata Punch EV, Tata Safari EV, Tata Sierra EV, Tata Tiago EV (New Generation), Tata Xpres-T EV, Toyota Urban Cruiser Ebella, VinFast VF MPV 7, VinFast VF6, VinFast VF7.
AIO Pro specifications
- Output: Up to 7.5 kW (up to 3.6 kW on the 16 A plug)
- Supply: Single phase, 220–240 V
- Max output current: 32 A
- Adjustable current: 8 A to 16 A on the 16 A plug, 8 A to 32 A on the 32 A plug
- Efficiency: Above 96%
- Protection rating: IP65, dust and water resistant
- Safety: Auto cut-off, overload, over-voltage, short-circuit, leakage, earthing and over-temperature protection
- Certifications: CE
- Compliance: ISO 15118, IEC 61851
- Plug: 16 A 3-pin and 32 A 3-pin CEE, interchangeable (32 A CEE socket included)
- Car connector: Type 2 (IEC 62196-2)
- Cable length: 5 m
- Control: Touch buttons and Zevpoint Home App (Wi-Fi and Bluetooth)
- Display: 1.77-inch TFT display
- Housing: High-grade ABS
- Operating temperature: -25°C to +50°C
- Weight: 3.2 kg
- Packed size: 400 x 400 x 100 mm
- In the box: AIO Pro charger, 32 A 3-pin CEE socket, carry bag, wall bracket, instruction manual
- Warranty: 5 years on cable and enclosure, 2 years on all other components
What your site needs for AIO Pro
- Power point: 32 A single-phase socket — For the full 7.5 kW. A regular 16 A socket works with the 16 A plug.
- Supply cable: 6 sq mm, 3-core copper — XLPE / HR FRLS, up to 29 m. Use 10 sq mm up to 49 m; longer runs need a site survey.
- Circuit breaker: 40 A double-pole MCB — A breaker of its own, so the charger never shares a circuit.
- Surge protection: Type 2 SPD, 1P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
- Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
- Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.
Can AIO Pro charge from both a 16 A and a 32 A socket?
Yes. AIO Pro is an all-in-one portable EV charger with two interchangeable plugs. The 32 A plug gives the full 7.5 kW from the 32 A socket that comes in the box, and the 16 A 3-pin plug charges at up to 3.6 kW from a regular 16 A socket, which is handy while travelling.
Is a 7.5 kW EV charger different from a 7 kW, 7.2 kW or 7.4 kW one?
They are all 32 A single-phase chargers; the label changes with the voltage the maker assumes (32 A at 220 V is about 7 kW, at 235 V about 7.5 kW). AIO Pro is rated 7.5 kW, a little above what any 7.2 kW or 7.4 kW car takes, so your car always gets its full home speed and the charger is never pushed to its limit. It also protects itself against high voltage.
Which cars charge at full speed on AIO Pro?
Cars that charge at up to about 7 kW, such as the Tata Nexon EV, Tata Punch EV, MG Windsor EV and Mahindra XUV400 EV, get their full home speed from AIO Pro on the 32 A plug. Every car with a Type 2 socket can use it.
How long does AIO Pro take to charge an electric car?
A car that charges at about 7 kW fills a 40 kWh battery from empty in about 6 hours on AIO Pro, so an overnight charge is enough. The charging-speed tool on this page shows the time for your car.
What cable and breaker does AIO Pro need?
For the full 7.5 kW, a 32 A socket on its own circuit with at least 6 sq mm copper cable and a 40 A MCB, plus surge protection and earthing. With the 16 A plug, a 16 A socket on its own circuit is enough. Our electrician checks your site before installing.
Can I set AIO Pro to suit my sanctioned load?
Yes. In the Zevpoint Home app you can set the charging current of AIO Pro anywhere from 8 A to 16 A on the 16 A plug and 8 A to 32 A on the 32 A plug, so this portable charger stays within the load on your connection. It holds the current you set rather than adjusting by itself.
Does AIO Pro work with every electric car in India?
AIO Pro has a Type 2 connector, which almost every electric car sold in India uses, so this all-in-one portable EV charger works with all of them. How fast it charges depends on the car. The charging-speed tool on this page shows the time for your car.
Is my home’s sanctioned load enough for AIO Pro?
Check two things on your electricity bill: the sanctioned load, and whether the supply is single phase or three phase. If the load is short for AIO Pro, your electricity company can raise it; the application is made in your name and we guide you through it.
Is AIO Pro waterproof? Can this portable EV charger be used outdoors?
Yes. Rain, splashing water and dust do not harm AIO Pro, so you can charge in an open parking spot. It is not built to stand in water, so do not leave it where water collects or floods.
Does AIO Pro restart charging after a power cut?
Yes. AIO Pro starts charging again by itself once the power is back, with nothing to press.
Does AIO Pro need installation, and what if I live in a housing society?
No mounting is needed: AIO Pro is a portable EV charger that plugs into the socket listed under “What your site needs” on this page. If that socket or its circuit has to be put in, we can do it for you; we install and service in every city across India.
If the cable passes through common areas, you will need permission (NOC) from your society before the visit.
What if AIO Pro stops working?
Raise a service request or write to support@zevpoint.com. We first try to fix AIO Pro remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.
Which Wi-Fi does the AIO Pro app need?
The Zevpoint Home app connects AIO Pro over 2.4 GHz Wi-Fi. If your router is 5 GHz only, a 2.4 GHz mobile hotspot works as well.
How soon is AIO Pro shipped, and is Cash on Delivery available?
Orders are processed and shipped within 24 hours, and tracking details are emailed to you.
Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.
GST invoice: email your GST details to support@zevpoint.com after ordering.
What does the AIO Pro warranty cover?
Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.
The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms
Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.
Can I return AIO Pro?
Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return
Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy
AIO Pro is built on one simple idea: the charger should fit the socket in front of you, not the other way round. Its plugs are interchangeable, so the same unit that charges at a full 7.5 kW from a 32A CEE point also charges from a regular 16A home socket, without a single adaptor.
That 32A single-phase design matters more than the headline number suggests. Plenty of chargers advertise large kilowatt figures that only appear on a three-phase connection most Indian homes do not have. AIO Pro is rated 32A on ordinary single-phase power, so the 7.5 kW on the box is the 7.5 kW you actually get.
Specifications
- Output: Up to 7.5 kW
- Supply: Single phase, 220-240V
- Current: 8A to 16A on the 16A plug, 8A to 32A on the 32A plug
- Plug: 16A 3-pin and 32A 3-pin CEE, interchangeable (32A CEE socket included)
- Car connector: Type 2 (IEC 62196-2)
- Cable length: 5 m
- Control: Built-in display with touch buttons, plus Zevpoint Home App
- Protection rating: IP65, dust and water resistant
- Safety: Auto cut-off, overload, over-voltage, short-circuit, leakage, earthing and over-temperature protection
- Weight: 3.2 kg
- Packed size: 400 x 400 x 100 mm
- In the box: AIO Pro charger, 32A 3-pin CEE socket, carry bag, wall bracket, instruction manual
- Warranty: 5 years on cable and enclosure, 2 years on all other components
Installation
- Power point: A dedicated 32A single-phase socket for full speed, or a regular 16A home socket with the 16A plug. The 32A CEE socket is included.
- Cable: 6 sq mm 3-core copper cable (XLPE / HR FRLS) for a run of up to 29 m from the distribution board; 10 sq mm up to 49 m. Longer runs need a site survey.
- Circuit breaker: 40A double-pole MCB
- Surge protection: Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
- Earthing: Proper earthing is required
- Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.