Aveo Pro 7.5 kW portable EV charger

Aveo Pro 7.5 kW portable EV chargerAveo Pro 7.5 kW portable EV charger, photo 2Aveo Pro 7.5 kW portable EV charger, photo 3Aveo Pro 7.5 kW portable EV charger, photo 4Aveo Pro 7.5 kW portable EV charger, photo 5Aveo Pro 7.5 kW portable EV charger, photo 6Aveo Pro 7.5 kW portable EV charger, photo 7Aveo Pro 7.5 kW portable EV charger, photo 8Aveo Pro 7.5 kW portable EV charger, photo 9Aveo Pro 7.5 kW portable EV charger, photo 10

A 7.5 kW smart portable EV charger you can take wherever you charge. Touch and app control, IP65 rated, with 10+ safety protections built in.

Aveo Pro is a 7.5 kW portable EV charger from Zevpoint, with a Type 2 car connector and control from the Zevpoint Home app. Price Rs. 20,999.00 to Rs. 22,999.00, incl. GST. Ships within 24 hours.

  • LED display
  • Touch & app control
  • IP65
  • 10+ safety protections

Our flagship portable: the same 7.5 kW as a wall charger, from the 32 A socket in the box, run from your phone.

  • LED display: Live session data, right on the unit.
  • Touch button: Start and stop charging on the charger.
  • 32 A CEE plug: Draws the full 32 A for a full 7.5 kW.
  • Cable, 6 m or 8 m: Pick the length that reaches your parking spot.
  • Plan: Schedule charging for the hours that suit you.
  • Track: See every session and the energy it used.
  • Adapt: Set the current anywhere from 8 to 32 A.
  • OTA updates: New firmware arrives over the air.
  • Built-in protections: Overload, short-circuit, leakage, earthing and over-temperature.
  • Auto cut-off: Stops on its own when charging is complete.
  • IP65 weather resistant: Dust and water resistant, indoors or out.
  • 5-year warranty: On the cable and enclosure; 2 years on everything else.

Which one is right for you?

  • Aveo Plus (3.6 kW): A 16 A home socket, with app control.
  • Aveo Pro (7.5 kW): Any home, with a car that charges at 7 kW.
  • Aveo X1 (11 kW): A three-phase supply and an 11 kW car.

Cars that charge at full speed on Aveo Pro

BYD Atto 3, BYD e6, BYD eMAX 7, BYD Seal, Eicher Pro 2055 EV, Hyundai Inster, Hyundai Kona Electric, Jupiter Electric JEM TEZ, Mahindra 3XO, Mahindra XUV400 EV, Mahindra Zeo, Maruti Suzuki e Vitara, Mercedes-Benz EQC, MG Comet EV FC, MG Hector Tomahawk EV, MG Windsor EV, MG ZS EV, Montra Electric Eviator, Switch Mobility IeV3, Switch Mobility IeV4, Tata Curvv EV, Tata Harrier EV, Tata Intra EV, Tata Nexon EV LR, Tata Nexon EV MR, Tata Punch EV, Tata Safari EV, Tata Sierra EV, Tata Tiago EV (New Generation), Tata Xpres-T EV, Toyota Urban Cruiser Ebella, VinFast VF MPV 7, VinFast VF6, VinFast VF7.

Aveo Pro specifications

  • Output: Up to 7.5 kW
  • Supply: Single phase, 220–240 V
  • Max output current: 32 A
  • Adjustable current: 8 A to 32 A
  • Efficiency: Above 96%
  • Protection rating: IP65, weather resistant
  • Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
  • Compliance: ISO 15118, IEC 61851
  • Plug: 32 A 3-pin CEE industrial plug (socket included)
  • Car connector: Type 2 (IEC 62196-2)
  • Cable length: 6 m (8 m on the XL version)
  • Control: Touch button and Zevpoint Home App (Wi-Fi and Bluetooth)
  • Display: LED display with live session data
  • Housing: High-grade ABS
  • Operating temperature: -35°C to +60°C
  • Unit size: 297 x 106 x 54 mm
  • Weight: 4.2 kg
  • Packed size: 410 x 330 x 190 mm
  • In the box: Aveo Pro charger, carry bag, wall bracket, 32 A CEE socket
  • Warranty: 5 years on cable and enclosure, 2 years on all other components

What your site needs for Aveo Pro

  • Power point: Dedicated 32 A single-phase circuit — Ending in the 32 A CEE socket that comes in the box.
  • Supply cable: 6 sq mm, 3-core copper — XLPE / HR FRLS, up to 29 m. Use 10 sq mm up to 49 m; longer runs need a site survey.
  • Circuit breaker: 40 A double-pole MCB — A breaker of its own, so the charger never shares a circuit.
  • Surge protection: Type 2 SPD, 1P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
  • Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
  • Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.

Can Aveo Pro charge at 7.5 kW at home?

Yes. Aveo Pro is a 7.5 kW portable EV charger with a 32 A industrial (CEE) plug, and the matching socket comes in the box. Once that socket is fitted on a circuit of its own, it charges at the full 7.5 kW on a single-phase supply. Cars that charge at about 7 kW, such as the Tata Nexon EV, Tata Punch EV, MG Windsor EV and Mahindra XUV400 EV, charge at their full home speed on it.

Is a 7.5 kW EV charger different from a 7 kW, 7.2 kW or 7.4 kW one?

They are all 32 A single-phase chargers; the label changes with the voltage the maker assumes (32 A at 220 V is about 7 kW, at 235 V about 7.5 kW). Aveo Pro is rated 7.5 kW, a little above what any 7.2 kW or 7.4 kW car takes, so your car always gets its full home speed and the charger is never pushed to its limit.

How long does Aveo Pro take to charge an electric car?

A car that charges at about 7 kW fills a 40 kWh battery from empty in about 6 hours on Aveo Pro, so an overnight charge is enough. The charging-speed tool on this page shows the time for your car.

What cable and breaker does Aveo Pro need?

Aveo Pro needs a circuit with at least 6 sq mm copper cable and a 40 A MCB of its own, ending in the 32 A socket from the box, plus surge protection and earthing. Our electrician checks your site before installing.

Can I set Aveo Pro to suit my sanctioned load?

Yes. In the Zevpoint Home app you can set the charging current of Aveo Pro anywhere from 8 A to 32 A, so this portable charger stays within the load on your connection. It holds the current you set rather than adjusting by itself.

Does Aveo Pro work with every electric car in India?

Aveo Pro has a Type 2 connector, which almost every electric car sold in India uses, so this portable EV charger works with all of them. How fast it charges depends on the car. The charging-speed tool on this page shows the time for your car.

Is my home’s sanctioned load enough for Aveo Pro?

Check two things on your electricity bill: the sanctioned load, and whether the supply is single phase or three phase. If the load is short for Aveo Pro, your electricity company can raise it; the application is made in your name and we guide you through it.

Is Aveo Pro waterproof? Can this portable EV charger be used outdoors?

Yes. Rain, splashing water and dust do not harm Aveo Pro, so you can charge in an open parking spot. It is not built to stand in water, so do not leave it where water collects or floods.

Does Aveo Pro restart charging after a power cut?

Yes. Aveo Pro starts charging again by itself once the power is back, with nothing to press.

Does Aveo Pro need installation, and what if I live in a housing society?

No mounting is needed: Aveo Pro is a portable EV charger that plugs into the socket listed under “What your site needs” on this page. If that socket or its circuit has to be put in, we can do it for you; we install and service in every city across India.

If the cable passes through common areas, you will need permission (NOC) from your society before the visit.

What if Aveo Pro stops working?

Raise a service request or write to support@zevpoint.com. We first try to fix Aveo Pro remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.

Which Wi-Fi does the Aveo Pro app need?

The Zevpoint Home app connects Aveo Pro over 2.4 GHz Wi-Fi. If your router is 5 GHz only, a 2.4 GHz mobile hotspot works as well.

How soon is Aveo Pro shipped, and is Cash on Delivery available?

Orders are processed and shipped within 24 hours, and tracking details are emailed to you.

Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.

GST invoice: email your GST details to support@zevpoint.com after ordering.

What does the Aveo Pro warranty cover?

Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.

The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms

Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.

Can I return Aveo Pro?

Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return

Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy

Aveo Pro is a portable 7.5 kW charger for single-phase homes. It draws a full 32A from a 32A CEE industrial socket, which is included, so it delivers the complete 7.5 kW without a three-phase connection.

The Zevpoint Home App connects over Wi-Fi and Bluetooth to set the current from 8A to 32A, schedule charging and keep a record of every session. A carry bag and wall bracket are included, and the XL version has an 8 m cable.

Specifications

  • Output: Up to 7.5 kW
  • Supply: Single phase, 220-240V
  • Current: Adjustable from 8A to 32A
  • Plug: 32A 3-pin CEE industrial plug (socket included)
  • Car connector: Type 2 (IEC 62196-2)
  • Cable length: 6 m (8 m on the XL version)
  • Control: Zevpoint Home App over Wi-Fi and Bluetooth
  • Protection rating: IP65, dust and water resistant
  • Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
  • Operating temperature: -35°C to +60°C
  • Unit size: 297 x 106 x 54 mm
  • Weight: 4.2 kg
  • Packed size: 410 x 330 x 190 mm
  • In the box: Aveo Pro charger, carry bag, wall bracket, 32A CEE socket
  • Warranty: 5 years on cable and enclosure, 2 years on all other components

Installation

  • Power point: A dedicated 32A single-phase circuit ending in the included 32A CEE socket
  • Cable: 6 sq mm 3-core copper cable (XLPE / HR FRLS) for a run of up to 29 m from the distribution board; 10 sq mm up to 49 m. Longer runs need a site survey.
  • Circuit breaker: 40A double-pole MCB
  • Surge protection: Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
  • Earthing: Proper earthing is required
  • Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.