Aveo 3.6+ kW portable EV charger

Aveo Plus 3.6 kW portable EV chargerAveo Plus 3.6 kW portable EV charger, photo 2Aveo Plus 3.6 kW portable EV charger, photo 3Aveo Plus 3.6 kW portable EV charger, photo 4Aveo Plus 3.6 kW portable EV charger, photo 5Aveo Plus 3.6 kW portable EV charger, photo 6Aveo Plus 3.6 kW portable EV charger, photo 7Aveo Plus 3.6 kW portable EV charger, photo 8Aveo Plus 3.6 kW portable EV charger, photo 9

A 3.6 kW smart portable EV charger that plugs into a regular home socket. Touch and app control, IP65 rated, with 10+ safety protections built in.

Aveo 3.6+ is a 3.6 kW portable EV charger from Zevpoint, with a Type 2 car connector and control from the Zevpoint Home app. Price Rs. 15,999.00 to Rs. 17,999.00, incl. GST. Ships within 24 hours.

  • LED display
  • Touch & app control
  • IP65
  • 10+ safety protections

A 3.6 kW charger that runs from an ordinary home socket, with control from your phone and a bag to take it with you.

  • LED display: Live session data, right on the unit.
  • Touch button: Start and stop charging on the charger.
  • 16 A home plug: Charges from an ordinary 16 A socket.
  • Cable, 6 m or 8 m: Pick the length that reaches your parking spot.
  • Plan: Schedule charging for the hours that suit you.
  • Track: See every session and the energy it used.
  • Adapt: Lower the current where the connected load is limited.
  • OTA updates: New firmware arrives over the air.
  • Built-in protections: Overload, short-circuit, leakage, earthing and over-temperature.
  • Auto cut-off: Stops on its own when charging is complete.
  • IP65 weather resistant: Dust and water resistant, indoors or out.
  • 5-year warranty: On the cable and enclosure; 2 years on everything else.

Which one is right for you?

  • Aveo Plus (3.6 kW): A 16 A home socket, with app control.
  • Aveo Pro (7.5 kW): Any home, with a car that charges at 7 kW.
  • Aveo X1 (11 kW): A three-phase supply and an 11 kW car.

Cars that charge at full speed on Aveo 3.6+

Citroen eC3, Citroen eC3X, Eicher Pro X, Euler Turbo EV 1000 Maxx, Mahindra e-Verito, Mahindra e2o, Mahindra e2o Plus, Mahindra REVAi, Mahindra XUV400 EV EC Pro, MG Comet EV, MG Hector Tomahawk PHEV, Tata Nexon EV Prime, Tata Tiago EV, Tata Tigor EV, Tata Tigor EV (pre-2023), Tata Xpres-T EV (pre-2023).

Aveo 3.6+ specifications

  • Output: Up to 3.6 kW
  • Supply: Single phase, 220–240 V
  • Max output current: 16 A
  • Adjustable current: Up to 16 A
  • Efficiency: Above 96%
  • Protection rating: IP65, weather resistant
  • Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
  • Compliance: ISO 15118, IEC 61851
  • Plug: 16 A 3-pin plug for an ordinary home socket
  • Car connector: Type 2 (IEC 62196-2)
  • Cable length: 6 m (8 m on the XL version)
  • Control: Touch button and Zevpoint Home App (Wi-Fi and Bluetooth)
  • Display: LED display with live session data
  • Housing: High-grade ABS
  • Operating temperature: -35°C to +60°C
  • Unit size: 297 x 106 x 54 mm
  • Weight: 3.4 kg
  • Packed size: 410 x 330 x 190 mm
  • In the box: Aveo Plus charger, wall bracket, carry bag
  • Warranty: 5 years on cable and enclosure, 2 years on all other components

What your site needs for Aveo 3.6+

  • Power point: Dedicated 16 A single-phase socket — With enough connected load for the charger.
  • Supply cable: 4 sq mm, 3-core copper — XLPE / HR FRLS, up to 39 m. Use 6 sq mm up to 58 m; longer runs need a site survey.
  • Circuit breaker: 20 A double-pole MCB — A breaker of its own, so the charger never shares a circuit.
  • Surge protection: Type 2 SPD, 1P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
  • Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
  • Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.

Can I plug Aveo 3.6 Plus into a normal home socket?

Yes, into a 16 A power socket on a circuit of its own, with nothing to install. Aveo 3.6 Plus is a 3.6 kW portable EV charger with a 16 A 3-pin plug. It suits cars that charge at about 3.3 kW, such as the Citroen eC3, MG Comet EV and Mahindra XUV400 EV EC Pro, and charges any other car at up to 3.6 kW.

Is a 3.6 kW EV charger different from a 3 kW or 3.3 kW one?

They are all 16 A single-phase chargers; the label changes with the voltage the maker assumes (16 A at 220 V is about 3.5 kW, at 230 V about 3.7 kW). Aveo 3.6 Plus is rated 3.6 kW, a little above what a 3.3 kW car takes, so your car always gets its full home speed and the charger is never pushed to its limit.

How long does Aveo 3.6 Plus take to charge an electric car?

At 3.6 kW, Aveo 3.6 Plus fills a 30 kWh battery from empty in about 9 to 10 hours, so it suits overnight charging at home. The charging-speed tool on this page shows the time for your car.

What socket and breaker does Aveo 3.6 Plus need?

A 16 A socket on its own circuit, wired with at least 4 sq mm copper cable and a 20 A MCB, plus surge protection and earthing. Our electrician can put the socket in if you do not have one.

Can I control Aveo 3.6 Plus from my phone?

Yes. Aveo 3.6 Plus works with the Zevpoint Home app over Wi-Fi and Bluetooth: you can schedule charging for the hours that suit you and lower the current where the connected load is limited. The touch button and display on the charger work without the app.

Does Aveo 3.6+ work with every electric car in India?

Aveo 3.6+ has a Type 2 connector, which almost every electric car sold in India uses, so this portable EV charger works with all of them. How fast it charges depends on the car. The charging-speed tool on this page shows the time for your car.

Is my home’s sanctioned load enough for Aveo 3.6+?

Check two things on your electricity bill: the sanctioned load, and whether the supply is single phase or three phase. If the load is short for Aveo 3.6+, your electricity company can raise it; the application is made in your name and we guide you through it.

Is Aveo 3.6+ waterproof? Can this portable EV charger be used outdoors?

Yes. Rain, splashing water and dust do not harm Aveo 3.6+, so you can charge in an open parking spot. It is not built to stand in water, so do not leave it where water collects or floods.

Does Aveo 3.6+ restart charging after a power cut?

Yes. Aveo 3.6+ starts charging again by itself once the power is back, with nothing to press.

Does Aveo 3.6+ need installation, and what if I live in a housing society?

No mounting is needed: Aveo 3.6+ is a portable EV charger that plugs into the socket listed under “What your site needs” on this page. If that socket or its circuit has to be put in, we can do it for you; we install and service in every city across India.

If the cable passes through common areas, you will need permission (NOC) from your society before the visit.

What if Aveo 3.6+ stops working?

Raise a service request or write to support@zevpoint.com. We first try to fix Aveo 3.6+ remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.

Which Wi-Fi does the Aveo 3.6+ app need?

The Zevpoint Home app connects Aveo 3.6+ over 2.4 GHz Wi-Fi. If your router is 5 GHz only, a 2.4 GHz mobile hotspot works as well.

How soon is Aveo 3.6+ shipped, and is Cash on Delivery available?

Orders are processed and shipped within 24 hours, and tracking details are emailed to you.

Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.

GST invoice: email your GST details to support@zevpoint.com after ordering.

What does the Aveo 3.6+ warranty cover?

Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.

The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms

Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.

Can I return Aveo 3.6+?

Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return

Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy

Aveo 3.6 Plus is a portable 3.6 kW charger that runs from an ordinary 16A home socket, with no special supply to arrange. It suits cars that charge at 3.3 kW or 3.6 kW, and any car when a slower overnight charge is enough.

The Zevpoint Home App connects over Wi-Fi and Bluetooth to set the current, schedule charging and keep a record of every session. Lower the current where the connected load is limited. A carry bag and wall bracket are included, and the XL version has an 8 m cable.

Specifications

  • Output: Up to 3.6 kW
  • Supply: Single phase, 220-240V
  • Current: Adjustable up to 16A
  • Plug: 16A 3-pin plug for an ordinary home socket
  • Car connector: Type 2 (IEC 62196-2)
  • Cable length: 6 m (8 m on the XL version)
  • Control: Zevpoint Home App over Wi-Fi and Bluetooth
  • Protection rating: IP65, dust and water resistant
  • Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
  • Operating temperature: -35°C to +60°C
  • Unit size: 297 x 106 x 54 mm
  • Weight: 3.4 kg
  • Packed size: 410 x 330 x 190 mm
  • In the box: Aveo 3.6 Plus charger, wall bracket, carry bag
  • Warranty: 5 years on cable and enclosure, 2 years on all other components

Installation

  • Power point: A dedicated 16A single-phase socket with adequate connected load
  • Cable: 4 sq mm 3-core copper cable (XLPE / HR FRLS) for a run of up to 39 m from the distribution board; 6 sq mm up to 58 m. Longer runs need a site survey.
  • Circuit breaker: 20A double-pole MCB
  • Surge protection: Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
  • Earthing: Proper earthing is required
  • Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.